
Free guides on candles, concrete and using molds.
Featured guideSilicone Mold InstructionsPreparing the mold, pouring, demolding and cleaning, step by step.Read the guide 











All the numbers from our guides in one place. Take a screenshot and keep it handy in your workshop.
Choose what you are making and the wax amount; fragrance oil, dye, stearic acid and pouring temperature show up right away.
Fragrance oil is calculated by wax weight; for light shades, start with just a few dye granules and add more little by little.
Pillar Soy Wax is usually poured at 55–65 °C; if the room is cold, you can go up to 70 °C.
If you do not know how many grams your mold holds, find out with the mold calculator; if you sell your candles, work out your cost per candle on the Grow Your Business page.
If the wax is poured too cold, it sets in layers and is hard to remove from the mold. Pour Pillar Soy Wax at 55–65 °C; if the room is cold, you can go up to 70 °C. Demold usually after 3–5 hours (depending on the mold size), once the mold no longer feels warm and the base is firm. If you have trouble with a mold that has no slit, you can cut a small slit on the side or back of the mold with a utility knife.
Poured too hot: soy wax separates as it cools, the center sinks, and the surface can come out rough with white blotches. If it has not started to set within 30 minutes, the temperature is too high. Try lowering the pouring temperature in 3 °C steps; put the candle in a draft-free room at 20–24 °C, not in the refrigerator. A sunken center is normal for paraffin pillar candles; once it cools, make a second pour.
This is called frosting. It is a natural trait of soy wax and does not affect the burn. Pouring too hot can increase the white blotches; keep the pouring temperature within the recommended range.
The fragrance oil may have been added to cold wax, stirred too little, or the candle may not have rested long enough. Add the fragrance oil at 80–85 °C and stir slowly for 2 minutes, then let the soy candle rest for 1–2 weeks. Adding more fragrance oil is not the solution.
Too much fragrance oil, fragrance oil added to cold wax, or fast and uneven cooling causes sweating. Gently melt the surface with a heat gun and the fragrance oil will blend back into the wax. Keep the ratio at 6–10% and store candles at 18–25 °C.
The flame is drawing more fuel than it can burn: the fragrance oil and dye ratio is high or the wick is too thick. Trim the wick to 0.5 cm; reduce the fragrance oil and dye, or switch to a thinner wick.
Fragrance oils that contain vanillin (vanilla and some sweet scents) darken with air and light, and this is more noticeable in soy wax. It is a visual change and does not affect the burn. Choose a dark color for these scents and keep the candle away from light.
Slowly add the water to the concrete powder and mix until smooth, then fill the mold slowly. Do not leave the concrete in the mold longer than necessary; test mixes of unknown brands in a single mold first.
First wipe it with a paper towel, then wash it with a soft sponge using tap water and a little dish detergent. Do not put it in the dishwasher and do not use solvents; store it on a flat surface, not stacked, and away from sunlight.
From photo reviews in our cagearts.com and Trendyol stores. Share what you made with a photo review, too.

We give our e-book, which walks you step by step from choosing materials to your first sales, as a gift with every order.