Your order is prepared and shipped within 0–2 business days after it is confirmed; we also ship on Saturdays. You can follow your order status on the Order Tracking page.
We ship with Hepsijet.
Shipping is free on orders of 2,500 TL and over. For orders under 2,500 TL, the shipping fee is 109 TL.
Check the package in front of the courier when you receive it. If there is any damage, do not accept the package, or ask the courier to draw up a damage report and email the report to us. We cannot accept shipping-related damage claims for packages that were accepted without a report.
You can pay by credit card, debit card, and bank transfer/EFT. Credit cards offer up to 12 installments.
Yes. When you select bank transfer/EFT on the payment page, a 4% discount is applied to your order.
Yes. A 50 TL discount is applied in your cart on your first purchase.
You can return a product within 14 days of the delivery date. The product's packaging must be unopened, and the product must be unused and undamaged. We cannot accept returns of products whose packaging has been opened or that have been used.
Message us on WhatsApp at 0850 309 45 24 or write to hello@cagearts.com. Once your request is approved, we will send you the return address; you just need to ship the product to that address.
If the product has a defect, we cover the shipping cost. For all other returns, the shipping cost is yours.
All of our silicone molds are suitable for pouring candle wax, epoxy, concrete, plaster and stone powder. Our molds are not made for food; do not use them to make food.
We make our molds in our own workshop from premium soft translucent silicone. With proper use and cleaning, you can get hundreds of pours from one mold.
Each mold's page lists the dimensions of the piece that comes out of the mold and the estimated amount of wax. If you want to measure it yourself, place the mold on a scale and zero it, fill it with water, and enter the grams of water on the Calculator page on our site.
Use a thick needle or a thin wooden skewer, and make the hole slowly and without applying force. Sudden force can damage the mold.
For our Taper Candle M1–M11 and Ghost Taper Candle molds, yes: they are shipped with a cut so that the piece is easy to remove. All our other molds are shipped uncut. Before pouring, secure a cut mold with a rubber band or packing tape; otherwise the material may leak out.
Remove the piece once the material has set and hardened; with Pillar Soy Wax, this is usually after 3–5 hours (depending on the mold size; it is ready once the mold no longer feels warm and the base is firm). Do not leave it in the mold longer than necessary. The habit of "I'll take it out tomorrow" shortens the life of the mold. Wait at least 24 hours after pouring before burning a candle.
Wipe off any residue with a paper towel, wash with a soft sponge using tap water and a little dish soap, then rinse well and dry. Do not put it in the dishwasher, and do not use solvents or hard brushes. Store the mold on a flat surface, without stacking, away from sunlight, in a cool, dry place.
For silicone molds, use "Pillar Soy Wax for Silicone Molds"; the pouring temperature is usually 55–65 °C. If the room is cold, you can go up to 70 °C. For glass, jar and aromatherapy candles, Golden Soya Wax or Natural Soy Wax (block form) is suitable. American Soy Wax can be used for both container and pillar candles.
We recommend letting a soy candle rest for at least 24 hours before burning it.
A 10-gram pack of dye granules colors about 10–15 kg of soy wax or paraffin. The true color of the dye shows once it has melted into the candle wax.
You can start with a silicone mold, Pillar Soy Wax, wicks, candle dye and fragrance oil; a thermometer to measure temperature makes things easier. With every order we give you our ebook "Candle Making and Selling Guide from Scratch" as a gift.
Yes. Soy wax comes in 20 and 25 kg packs, and fragrance oil, wicks and jars also cost less per unit in larger packs. See the Grow Your Candle Business page for a comparison.
Yes. Fill out the form on the Custom Silicone Mold Service page, and we will make your mold from your design.
Yes. You can download the Cage Art Studio app from the App Store and Google Play.
WhatsApp: 0850 309 45 24 · Email: hello@cagearts.com