Pick your mold or enter its water weight to work out the wax, fragrance, mortar powder and mixing water you need, with quantity and waste allowance included.
Results are estimates; they may vary slightly with the mold's shape and the material you use.
Pillar Soy Wax is usually poured at 55–65 °C; if the room is cold, you can go up to 70 °C.
Covers what stays in the pot, the spout and on the stirrer. 5–10% is realistic for most workshops.
One water measurement gives you two different recipes.
| Wax | Concrete | |
|---|---|---|
| Measure | Water the mold holds (g) | Water the mold holds (g) |
| Extra | Fragrance: 6–10% of the wax | Mixing water: shown by the calculator |
| Pouring | 55–65 °C | Mix powder and water until smooth, then pour |
| Waiting | Demolding: usually 3–5 hours; at least 24 hours before burning | Follow the drying time on the mortar pack |
| Mold | Clean and dry | Clean and dry |
If the product page lists the mold's capacity, you can skip this: just pick your mold.
Place the empty, dry mold on the scale and tare it.
Fill the mold with water up to the rim without overflowing.
The grams shown are the mold's water volume (1 g of water ≈ 1 ml).
Pour the water out, dry the mold completely and enter the value in the calculator.
Water is the easiest way to measure a mold's inner volume: 1 gram of water takes up about 1 ml. The calculator works out the wax you need from that.
No. When you pick your mold in the calculator, its recorded capacity is used. For molds without a recorded capacity you will be asked for the water weight.
6–10% is recommended for most candles; the calculator uses 8% by default. If your fragrance supplier recommends something else, choose “Custom”.
It covers what stays in the pouring pot, the spout and on the stirrer. 5–10% is realistic for most workshops; the default is 5%.
The calculator also shows the mixing water for the mortar powder. If the ratio on your mortar pack is different, follow the pack.