Product Name: Soy Wax
| Ingredients Name | CAS Number | EC Number |
|---|---|---|
| Soybean Oil | 8016-70-4 | 232-410-2 |
Hazards Identification: According to GHS: No data for classification.
Emergency Overview: To the best of our knowledge, information and data, we couldn't know the health and environmental hazards.
Eye Contact: If irritation or redness develops from exposure to fumes generated during hot-melt processing operations, move victim away from exposure and into fresh air. Flush eyes with clean water. If irritation or redness persists, seek medical attention. For contact with the molten material, gently open eyelids and flush affected eyes with cold water. Seek immediate medical attention.
Skin Contact: For contact with molten material, leave material on skin and flush or immerse affected areas using cold water. Seek immediate medical attention.
Ingestion: First aid is not normally required for the solid material; however, if molten material is swallowed, seek immediate medical attention.
Inhalation: If respiratory symptoms develop from exposure to fumes emitted by the molten material, move victim away from source of exposure and into fresh air. If symptoms persist, seek medical attention. If victim is not breathing, immediately begin artificial respiration. If breathing difficulties develop, oxygen should be administered by qualified personnel. Seek immediate medical attention.
Flammability of the Product: Not regulated
Auto-Ignition Temperature: No data
Flash Points: >600 Deg.F, OSHA
Burn Rate (solids only): No data
Flammable Limits: No data
Extinguishing Media: Dry chemical, foam, water, sand or earth is recommended.
Unusual Fire & Explosion Hazards: This material may burn, but will not ignite readily.
Fire Fighting Procedures: Emergency responders in the danger area should wear bunker gear and self-contained breathing apparatus for fires beyond the incipient state (29CFR 1910.156). In addition, wear other appropriate protective equipment as conditions warrant. Isolate danger area, keep unauthorized personnel out. Contain spill if it can be done with minimal risk. Move undamaged containers from danger area if it can be done with minimal risk. With water, cool equipment exposed to fire it can be done with minimal risk.
This material may burn but will not ignite readily. Keep all sources of ignition away from spill/release. Stay upwind and away from spill. Isolate danger area and keep unauthorized personnel out.
Contain spill if it can be done with minimal risk. Wear appropriate protective equipment, including respiratory protection, as conditions warrant. Prevent spilled material from entering sewers, storm drains, other unauthorized treatment drainage systems and natural waterways.
Notify fire authorities and appropriate federal, state and local agencies. Cleanup under expert supervision is advised. Minimized dust generation. Sweep up and package appropriately for disposal.
Handling: Wash thoroughly after handling. Do not wear contaminated clothing or shoes. Use good personal hygiene practice. "Empty" containers residue (liquid and/or vapor) and may be dangerous. Do not pressurize, cut weld, braze, solder, drill, grind or expose such containers to heat, flame, sparks, or other sources of ignition. They may explode and cause injury or death. All containers should be disposed of in an environmentally-safe manner and in accordance with governmental regulations. Before working or in tanks which contain or have contained this material, refer to OSHA regulations, ANSI Z49.1 and other governmental and industrial references pertaining to cleaning, repairing, welding, or other contemplated operations.
Storage: Keep container(s) tightly closed. Use and store this material in cool, dry, well-ventilated areas away from heat and all sources of ignition. Store only in approved containers. Keep away from any incompatible material. Protect container(s) against physical damage.
Engineering Controls: Mechanical exhaust required. Safety shower and eye bath.
Personal Protection:
Other Protect: No smoking, drinking and eating at working site. Wash thoroughly after handling.
| Appearance | Flakes |
| Odor | Weak odor |
| Color | Off white |
| Solubility in Water | Negligible |
| Specific Gravity | Approximately 9 |
| Boiling Point | N/A |
| Melting Point | 150-158 Deg.F |
| Vapor Pressure (mm Hg) | No data |
| Vapor Density (air+1) | No data |
| Percent Volatile | Negligible |
| Bulk Density | Approximately 7 pounds per gallon |
Stability: Stable under normal conditions of storage and handling.
Polymerization: Will not occur.
Incompatibility (materials to avoid): Avoid contact with strong oxidizing agents.
Hazardous Decomposition Products: Combustion can yield major amounts of oxides of carbon and minor amounts of oxides of sulfur and nitrogen.
Conditions to Avoid: Avoid all possible sources of ignition.
| Acute Toxicity | Not available. |
| Skin Corrosion/Irritation | Not available. |
| Serious Eye Damage/Irritation | Not available. |
| Toxicity to Animals | Not available. |
| Chronic Effects on Humans | Not available. |
| Other Toxic Effects on Humans | Not available. |
| Special Remarks | Not available. |
This material, if discarded as produced, is not a RCRA "listed" of "characteristic" hazardous waste. Use which results in chemical or physical change or contamination may subject it to hazardous waste regulations. Along with properly characterizing all waste materials, consult state and local regulations regarding the proper disposal of this material.
Air Transport: Non-hazardous for air transport.
Sea Transport: Non-hazardous for sea transport.
Amendments: No data for classification.
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. We make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes. In no way shall we be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, however arising from using the above information.