Cage Art StudioWhere art meets craftDownload
All orders ship within 0–2 business daysFree shipping over 2,500 TL4% off with bank transfer/EFT50 TL off your first order
All orders ship within 0–2 business days
Calculator

How much wax does your mold take?

Pick your mold or enter its water weight to work out the wax, fragrance, mortar powder and mixing water you need, with quantity and waste allowance included.

Pick your mold, get your recipe.

Results are estimates; they may vary slightly with the mold's shape and the material you use.

Results update as you type
01 — Mold size
CAGE ART STUDIO MOLD260 molds
Mold water volume
—
Pouring temperature
55–65 °C

Pillar Soy Wax is usually poured at 55–65 °C; if the room is cold, you can go up to 70 °C.

02 — For one piece
Wax neededg
0
Fragrance ratio%
Fragrance neededg
0recommended 6–10%
03 — Quantity and waste
Pieces / cavities
Waste allowance

Covers what stays in the pot, the spout and on the stirrer. 5–10% is realistic for most workshops.

Total wax
0g
0.00 kg · 1 pcs
Total fragrance
0.0g
at 8%
Total to melt
0.00kg
1 pcs · +5% waste · 1 wicks
Material: Candle wax
See materials

Materials for this pour

Pillar Soy Wax for Silicone Molds 1 kg
1 kg is enough for this pour
₺499.00
Ready-Made Pre-Tabbed Candle Wick 8 cm
1 wicks needed
₺69.00

Wax and concrete in the same mold

One water measurement gives you two different recipes.

WaxConcrete
MeasureWater the mold holds (g)Water the mold holds (g)
ExtraFragrance: 6–10% of the waxMixing water: shown by the calculator
Pouring55–65 °CMix powder and water until smooth, then pour
WaitingDemolding: usually 3–5 hours; at least 24 hours before burningFollow the drying time on the mortar pack
MoldClean and dryClean and dry

Measure your mold in 4 steps

If the product page lists the mold's capacity, you can skip this: just pick your mold.

1

Zero the scale

Place the empty, dry mold on the scale and tare it.

2

Fill with water

Fill the mold with water up to the rim without overflowing.

3

Read the weight

The grams shown are the mold's water volume (1 g of water ≈ 1 ml).

4

Dry and calculate

Pour the water out, dry the mold completely and enter the value in the calculator.

Frequently asked questions

Why does the calculator use water weight?

Water is the easiest way to measure a mold's inner volume: 1 gram of water takes up about 1 ml. The calculator works out the wax you need from that.

The product page lists my mold's capacity. Do I still need to measure?

No. When you pick your mold in the calculator, its recorded capacity is used. For molds without a recorded capacity you will be asked for the water weight.

How much fragrance should I add?

6–10% is recommended for most candles; the calculator uses 8% by default. If your fragrance supplier recommends something else, choose “Custom”.

What is the waste allowance?

It covers what stays in the pouring pot, the spout and on the stirrer. 5–10% is realistic for most workshops; the default is 5%.

How much water should I use for concrete?

The calculator also shows the mixing water for the mortar powder. If the ratio on your mortar pack is different, follow the pack.

Add the supplies to your cart